Title
Scag SFC-30 Walk-Behind Mowers
Description:
Welded and fabricated using military-grade steel for years of dependable performance, the SFC-30 Finish Cut Walk-Behind Mower is no pushover. Packing big productivity and versatility into a compact form, this commercial-grade machine delivers a beautiful, professional quality-of-cut, helping you put the finishing touches on the job or at home.
Front Swivel Caster Wheels
Front swivel caster wheel model offers increased ease of manueverability in highly landscaped areas. Swivel wheel accessory also available to convert fixed wheel models.
Engines
Kohler Command PRO CV224 Engines
With best-in-class power,* the all-new Command PRO CV224 is the ultimate engine for commercial walk-behind mowers.
Features include:
- Torque output: 11.0 ft-lbs
- 3-year limited commercial warranty
- Enjoy effortless starts thanks to our Easy-Pull™ technology
- Easy pours and less spilling with Accu-Fill® fuel tank’s 45% larger angled fuel neck
- Consistent-Cut™ technology maintains engine speed for a cleaner turf cut, even in tall, wet grass
- Cast-iron cylinder liners add durability and engine protection
Specifications:
Dimensions & Weight
- Length – Transport (handles in upright transport position): 41″ / 44″
- Length – Minimum (handles in highest operating position): 66″ / 69″
- Length – Maximum (handles in lowest operating position): 73.5″ / 76.5″
- Tracking Width: 28.75″
- Width (with discharge chute): 36.75″
- Width (with discharge block-off plate): 31.5″
- Height – Lowest Operating: 36.75″
- Height – Maximum Operating: 45.25″
- Height – Handle Bar in Storage Position: 57.5″
- Operating Weight – Bagging: 220 lbs. / 233 lbs.
- Operating Weight – Mulching: 214 lbs. / 227 lbs.
- Operating Weight – Discharging: 213 lbs. / 226 lbs.
General Specifications
- Total Fuel Capacity: 1 gallon (0.37 gallon capacity for California models)
- Rear Tires: 10.5″ x 3″ rubber tire with glass-filled polypropylene wheel
- Front Tires: 9″ x 2.25″ rubber tire with glass-filled polypropylene wheel
Drive System
- Drive System Type: GT MV 702 Transmission
- Forward Ground Speed: Up to 4 mph
- Parking Brake: Hand lever
Deck Specifications
- Cutting Width: 30″
- Deck Type: Extra-strong, fully fabricated and welded steel cutter deck with offset blade, non-timed deck setup
- Cutting Height: 1.5″ to 5″ in 0.25″ increments
- Blade Type: Optimized for maximum performance in discharging, mulching, or bagging
- Deck Lift: Hand lever, single-point adjustment
- Construction: 14-gauge, Grade 100 Military Steel deck shell with 12-gauge spindle reinforcement plate and ¼” trim side reinforcement bar for extra impact protection
- Spindles: Aluminum housing with sealed ball bearings
- Blade Engagement: Blade brake clutch (allows disengagement of cutter blades without shutting off the machine)
Discharge, Mulch, & Bagging
- Standard Discharge, Mulch, & Bagging: Yes
- Bag Capacity: 2.5 Bushels
Description:
Welded and fabricated using military-grade steel for years of dependable performance, the SFC-30 Finish Cut Walk-Behind Mower is no pushover. Packing big productivity and versatility into a compact form, this commercial-grade machine delivers a beautiful, professional quality-of-cut, helping you put the finishing touches on the job or at home.
Front Swivel Caster Wheels
Front swivel caster wheel model offers increased ease of manueverability in highly landscaped areas. Swivel wheel accessory also available to convert fixed wheel models.
Engines
Kohler Command PRO CV224 Engines
With best-in-class power,* the all-new Command PRO CV224 is the ultimate engine for commercial walk-behind mowers.
Features include:
- Torque output: 11.0 ft-lbs
- 3-year limited commercial warranty
- Enjoy effortless starts thanks to our Easy-Pull™ technology
- Easy pours and less spilling with Accu-Fill® fuel tank’s 45% larger angled fuel neck
- Consistent-Cut™ technology maintains engine speed for a cleaner turf cut, even in tall, wet grass
- Cast-iron cylinder liners add durability and engine protection
Specifications:
Dimensions & Weight
- Length – Transport (handles in upright transport position): 41″ / 44″
- Length – Minimum (handles in highest operating position): 66″ / 69″
- Length – Maximum (handles in lowest operating position): 73.5″ / 76.5″
- Tracking Width: 28.75″
- Width (with discharge chute): 36.75″
- Width (with discharge block-off plate): 31.5″
- Height – Lowest Operating: 36.75″
- Height – Maximum Operating: 45.25″
- Height – Handle Bar in Storage Position: 57.5″
- Operating Weight – Bagging: 220 lbs. / 233 lbs.
- Operating Weight – Mulching: 214 lbs. / 227 lbs.
- Operating Weight – Discharging: 213 lbs. / 226 lbs.
General Specifications
- Total Fuel Capacity: 1 gallon (0.37 gallon capacity for California models)
- Rear Tires: 10.5″ x 3″ rubber tire with glass-filled polypropylene wheel
- Front Tires: 9″ x 2.25″ rubber tire with glass-filled polypropylene wheel
Drive System
- Drive System Type: GT MV 702 Transmission
- Forward Ground Speed: Up to 4 mph
- Parking Brake: Hand lever
Deck Specifications
- Cutting Width: 30″
- Deck Type: Extra-strong, fully fabricated and welded steel cutter deck with offset blade, non-timed deck setup
- Cutting Height: 1.5″ to 5″ in 0.25″ increments
- Blade Type: Optimized for maximum performance in discharging, mulching, or bagging
- Deck Lift: Hand lever, single-point adjustment
- Construction: 14-gauge, Grade 100 Military Steel deck shell with 12-gauge spindle reinforcement plate and ¼” trim side reinforcement bar for extra impact protection
- Spindles: Aluminum housing with sealed ball bearings
- Blade Engagement: Blade brake clutch (allows disengagement of cutter blades without shutting off the machine)
Discharge, Mulch, & Bagging
- Standard Discharge, Mulch, & Bagging: Yes
- Bag Capacity: 2.5 Bushels
