Description:

Convenient, packed with features, and most importantly, packed with power. Capable of 200 cuts on a single charge, the DCS-5000 harnesses the professional-grade power of the ECHO enforce® 56V battery system for smooth, easy cuts and all-day performance.

Features:

• 18 in. bar and chain for larger cuts
• Flip-lever oil cap for easy removal
• Brushless motor

Specifications:

• 2.5Ah:
• Voltage: 56V
• Motor: Brushless
• Battery Capacity: 2.5Ah
• Battery Capacity (Wh): 126 Wh
• Run Time: Up to 60 cuts on a single charge
• Charging Options:
• Standard Charger: Included
• Rapid Charger: Available
• Recharge Time:
• Standard Charger: 75 minutes
• Rapid Charger: 38 minutes
• Bar Length: 18 inches
• Chain Gauge: .050 inches
• Chain Pitch: 3/8" LP
• Weight (with battery): 12.7 pounds
• Warranty:
• Bare Tool Warranty: 5 years consumer, 2 years commercial
• Battery Warranty: 2 years consumer, 2 years commercial
• 5.0Ah:
• Voltage: 56V
• Motor: Brushless
• Battery Capacity: 5.0Ah
• Battery Capacity (Wh): 252 Wh
• Run Time: Up to 200 cuts
• Charging Options:
• Standard Charger: Included
• Rapid Charger: Available
• Recharge Time:
• Standard Charger: 150 minutes
• Rapid Charger: 75 minutes
• Bar Length: 18 inches
• Chain Gauge: .050 inches
• Chain Pitch: 3/8" LP
• Weight (with battery): 14.6 pounds
• Warranty:
• Bare Tool Warranty: 5 years consumer, 2 years commercial
• Battery Warranty: 2 years consumer, 2 years commercial

Description:

This powerful, easy-to-use homeowner chainsaw is ideal for woodcutting tasks around the home.

The MS 182 is a powerful, easy-to-use homeowner chainsaw that gives you performance you can depend on. This chainsaw is equipped with toolless fuel and oil caps with retainers, offering a simple and convenient method to tighten and loosen oil caps without the use of tools. Featuring a Master Control Lever™ and an anti-vibration system, the MS 182 is designed to reduce fatigue while offering more control and maneuverability, making it the ideal tool for woodcutting tasks around the home.

Features:

1. STIHL Easy2Start™ (E): The Easy2Start™ system minimizes the effort required to start STIHL outdoor power tools, making the starting process almost effortless.
2. Diagnostic Socket: A convenient diagnostic socket allows a local STIHL Dealer to plug in the chainsaw and access information about operating time and diagnostic support.
3. IntelliCarb™ Compensating Carburetor: Automatically adjusts the air/fuel ratio to maintain the engine's correct RPM, even when the air filter becomes restricted or clogged.
4. Bumper Spikes: Prevent pull-in and provide better control during cutting, enhancing safety and ease of use.
5. STIHL OILOMATIC® Saw Chain: Specially engineered grooves channel oil to critical wear areas of the chain, improving longevity and performance.
6. Reduced Exhaust Emissions: Helps users minimize their impact on the environment by reducing exhaust emissions.
7. Front Hand Guard: Reduces the risk of injury during operation.
8. Rear Hand Guard: Provides additional protection and a wide area for foot placement during starting.
9. Translucent Fuel Tank: Allows operators to easily check the fuel level before starting work.
10. Easy-Access Air Filter Cover: Simplifies filter cleaning or replacement with its easy-to-remove design.
11. Anti-Vibration System: Minimizes vibration levels to reduce operator fatigue and provide a more comfortable working experience.
12. Spark Arrester Muffler: Large baffles reduce noise levels and contain a screen to reduce the emission of sparks.
13. Side-Access Chain Tensioner: Allows for convenient adjustment of the saw chain with a bar wrench, improving usability.
14. Throttle Trigger Lockout: A safety feature that must be depressed before the trigger can be activated, enhancing safety during operation.
15. High-Tech Polymer Housings: Lightweight, impact-resistant, and corrosion-resistant housings offer durability and reliability.

Specifications:

• Power Source: Gas
• Powerhead Weight: 10.1 lbs.
• Recommended Guide Bar Length: 16 in.
• OILOMATIC® Chain: 3/8" PM3
• Chain Oil Capacity: 9.5 oz.
• Engine Power: 2.1 bhp (brake horsepower)
• Fuel Capacity: 13.5 oz.
• Displacement: 35.8 cc (cubic centimeters)

Description:

The MS 162 chainsaw is optimal for homeowners and occasional use. It is lightweight and maneuverable features reduced exhaust emissions and an anti-vibration system for increased operator comfort. The Master Control Lever™ allows you to operate the choke, throttle lock, and on-off switch with a single lever making this tool an ideal homeowner chainsaw.

Features:

• STIHL Quickstop® - STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• STIHL OILOMATIC® Saw Chain - The chain features specially engineered grooves designed to channel oil to critical wear areas.
• Easy-to-Use Homeowner Chainsaw - Featuring powerful performance and lightweight convenience, this homeowner chain saw gets the job done when it comes to yard maintenance and cutting firewood.
• Front Hand Guard - The hand guard is designed to reduce the risk of injury.
• Rear Hand Guard - The hand guard is designed to reduce the risk of injury and provide a wide area for foot placement during starting.
• Lightweight Portability - This product is lightweight for easy portability, great maneuverability, and extended use.
• Translucent Fuel Tank - The semi-transparency allows operators to easily check the fuel level before starting work.
• Easy-Access Air Filter Cover - The provided easy-access makes it almost effortless to remove the cover for fast filter cleaning or replacement.
• Spark Arrester Muffler - Large baffles reduce noise level and contain a screen designed to reduce the emission of sparks.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Throttle Trigger Interlock - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Made in America - A majority of STIHL products sold in America are made in America of U.S. and global materials.

Specifications:

• Power Source: Gas
• Powerhead Weight: 9.9 lbs.
• Guide Bar Length (Recommended): 16 in.
• Chain Type: OILOMATIC® 3/8" PMM3
• Chain Oil Capacity: 9.5 oz.
• Engine Power: 1.6 bhp
• Fuel Capacity: 13.5 oz.
• Displacement: 30.1 cc

Description:

The MS 180 C-BE is where handy meets high tech. This lightweight, easy-to-maneuver chainsaw’s first order of business is fast, easy starting with the STIHL Easy2Start™ system. Just a light pull on the cord does it. Just as easy is the STIHL Quick Chain Adjuster, which makes it possible to adjust the saw chain without tools. Unbelievably easy to use, the MS 180 C-BE is a big help with your list of woodcutting chores around the home.

Features:

• STIHL Easy2Start™ (E) - The STIHL Easy2Start™ system makes starting STIHL outdoor power tools almost effortless, eliminating the need for a strong pull of the starting cord. This advanced starting system is designed to make starting STIHL products easier. The specific system may vary by model, but in each case, a quick pull overcomes the engine’s compression to minimize the strength and effort required to start. Available on selected products.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• Quick Chain Adjuster (QCA) (B) - The Quick Chain Adjuster (QCA) (B) allows the user to adjust the tension of the chain without the use of tools. This allows for easy chain adjustment.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Throttle Trigger Lockout - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Made in America - A majority of STIHL products sold in America are made in America of U.S. and global materials.

Specifications:

• Power Source: Gasoline (Gas)
• Powerhead Weight: 9.3 lbs.
• Guide Bar Length (Recommended): 16 inches
• Chain Type: OILOMATIC® 3/8" PMM3
• Chain Oil Capacity: 4.9 oz.
• Engine Power: 2.0 brake horsepower (bhp)
• Fuel Capacity: 8.5 oz.
• Displacement: 31.8 cc

Description:

The MS 211 uses advanced technology in the form of a powerful, fuel-efficient, low exhaust emission engine, but it doesn’t stop there. It also reduces your maintenance with a professionally inspired pre-separation air filtration system (extending air filter life up to five times longer).

Features:

• STIHL ElastoStart™ - The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• Ematic™ Lubrication System - The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• STIHL Quickstop® - STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Throttle Trigger Lockout - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Made in America - A majority of STIHL products sold in America are made in America of U.S. and global materials.

Specification:

• Power Source: Gas
• Powerhead Weight: 9.5 lbs.
• Guide Bar Length (Recommended): 18 in.
• Chain Type: OILOMATIC® 3/8" PM3
• Chain Oil Capacity: 9.0 oz.
• Engine Power: 2.3 bhp
• Fuel Capacity: 9.1 oz.
• Displacement: 35.2 cc

Description:

What do you get when you combine a hardworking chainsaw with easy-to-use features? You get the STIHL® MS 211 C-BE. This chainsaw takes all the low exhaust emission and air-filtration technology of the MS 211 and joins it with two of the most popular STIHL® comfort features. STIHL® Easy2Start™ allows you to start the engine with just a light pull on the cord. The Quick Chain Adjuster allows you to adjust the chain without tools. Now you can get power and comfort in one high-tech chainsaw. If you’re a homeowner who wants it all, STIHL® has heard your call.

Features:

• STIHL® Easy2Start™ (E) - The STIHL® Easy2Start™ system makes starting STIHL® outdoor power tools almost effortless, eliminating the need for a strong pull of the starting cord. This advanced starting system is designed to make starting STIHL® products easier. The specific system may vary by model, but in each case, a quick pull overcomes the engine’s compression to minimize the strength and effort required to start. Available on selected products.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• Quick Chain Adjuster (QCA) (B) - The Quick Chain Adjuster (QCA) (B) allows the user to adjust the tension of the chain without the use of tools. This allows for easy chain adjustment.
• Winter/Summer Shutter - The Winter/Summer Shutter allows the carburetor to operate at optimum temperature year-round and helps to prevent carburetor icing when working below 50°F (10°C).
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Anti-Vibration System - STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ - The Master Control Lever™ is an easy-to-use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Throttle Trigger Lockout - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Made in America - A majority of STIHL® products sold in America are made in America of U.S. and global materials.

Specifications

• Power Source: Gas
• Powerhead Weight: 10.1 lbs
• Guide Bar Length (Recommended): 18 in.
• Oilomatic® Chain: 3/8" PM3
• Chain Oil Capacity: 9.0 oz.
• Engine Power: 2.3 bhp
• Fuel Capacity: 9.1 oz.
• Displacement: 35.2 cc

Note: STIHL recommends #3636 (63 PM3 61) OILOMATIC® saw chain and 18" 3005 000 4817 Ematic™ guide bar combination. Compatible guide bar ranges: 12" to 18". The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on.

Description:

When it comes to building a reliable woodpile for keeping your home warm and cozy, the STIHL MS 250 chainsaw is the tool you need. With an exceptional power-to-weight ratio, this chainsaw is up to the task of handling clearing or cleanup tasks, as well as cutting through small limbs and trees. Easy to use and packed with great features, the MS 250 has been a customer favorite for many years, setting the standard for efficiency and reliability in every performance.

Features:

• Easy-Access Air Filter Cover: Provides effortless removal of the cover for fast filter cleaning or replacement.
• Winter/Summer Shutter: Allows the carburetor to operate at optimum temperature year-round and helps prevent carburetor icing when working below 50°F (10°C).
• Anti-Vibration System: Minimizes vibration levels, reducing operator fatigue and providing a more comfortable working experience.
• Master Control Lever™: An easy-to-use single lever that operates the choke, starting throttle lock, and on-off switch. The throttle trigger must be pulled before moving the Master Control Lever™ to the choke position.
• Side-Access Chain Tensioner: Makes it more convenient for the user to adjust the saw chain with a bar wrench compared to the typical location of the guide bar adjustment screw.
• Throttle Trigger Lockout: Ensures safety by requiring depression before the trigger can be activated.
• High-Tech Polymer Housings: Lightweight, impact-resistant, and corrosion-resistant.
• Made in America: The majority of STIHL products sold in America are manufactured in America using U.S. and global materials.

Specifications:

• Power Source: Gas
• Powerhead Weight: 10.1 lbs.
• Guide Bar Length (Recommended): 18 inches
• Oilomatic® Chain: .325" RM3
• Chain Oil Capacity: 6.8 oz.
• Engine Power: 3.0 bhp
• Fuel Capacity: 15.9 oz.
• Displacement: 45.4 cc

Description:

The STIHL MS 251 C-BE offers all of the comfort and ease of the MS 251 WOOD BOSS®, but this chainsaw is also easy to start and adjust on the fly. The MS 251 C-BE is perfect for felling small trees, pruning and thinning, and cutting firewood simply and efficiently. It even boasts up to a 20 percent fuel savings and a 50 percent reduction in exhaust emissions when compared to previous models—allowing you to enjoy longer run times while feeling good about your impact on the environment. A Quick Chain Adjuster also makes it simple to put the correct tension on the saw chain without tools. Plus, features like Easy2Start™ technology, a Master Control Lever™, and reduced vibration make the STIHL MS 251 C-BE a great choice for ambitious homeowners who need a chainsaw that is easy to use while still packing plenty of power.

Features:

• STIHL Easy2Start™ (E) - The STIHL Easy2Start™ system makes starting STIHL outdoor power tools almost effortless, eliminating the need for a strong pull of the starting cord. This advanced starting system is designed to make starting STIHL products easier. The specific system may vary by model, but in each case, a quick pull overcomes the engine’s compression to minimize the strength and effort required to start. Available on selected products.
• Quick Chain Adjuster (QCA) (B) - The Quick Chain Adjuster (QCA) (B) allows the user to adjust the tension of the chain without the use of tools. This allows for easy chain adjustment.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Tool less Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Throttle Trigger Lockout - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
• Made in America - A majority of STIHL products sold in America are made in America of U.S. and global materials.

Specifications:

• Power Source: Gas
• Powerhead Weight: 11.5 lbs.
• Guide Bar Length (Recommended): 18 in.
• OILOMATIC® Chain: .325" RM3
• Chain Oil Capacity: 6.7 oz.
• Engine Power: 3.0 bhp
• Fuel Capacity: 13.2 oz.
• Displacement: 45.6 cc

Description:

The STIHL MS 251 WOOD BOSS® chainsaw is designed to deliver all the power you’d expect from STIHL equipment with a comfortable and ergonomic design. The MS 251 WOOD BOSS® is perfect for felling small trees, pruning and thinning, and cutting firewood simply and efficiently. With up to a 20 percent increase in fuel savings and a 50 percent reduction in exhaust emissions—when compared to previous models—you can enjoy a longer run time while feeling good about your impact on the environment. Features like a Master Control Lever™ and reduced vibration make the STIHL MS 251 WOOD BOSS® a lean, easy-to-use machine that still packs plenty of power.

Features:

• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Throttle Trigger Lockout - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
• Made in America - A majority of STIHL products sold in America are made in America of U.S. and global materials.

Specifications:

• Power Source: Gas
• Powerhead Weight: 11.0 lbs.
• Guide Bar Length (Recommended): 18 in.
• Oilomatic® Chain: .325" RM3
• Chain Oil Capacity: 6.7 oz.
• Engine Power: 3.0 bhp
• Fuel Capacity: 13.2 oz.
• Displacement: 45.6 cc

Description:

The MS 261 C-M has all the same great features as the MS 261—low exhaust emissions, high fuel efficiency and robust performance—but also features the advanced STIHL M-Tronic™ engine management system. The STIHL M-Tronic™ onboard microprocessor digitally monitors and automatically compensates for changes in your work conditions, including elevation, temperature, fuel quality, varying octane levels, and dirty filters. The end result is maximum performance across a wide range of cutting conditions without making any manual adjustments. The MS 261 C-M also features redesigned cylinders and a slimmer, ergonomic housing for an impressive power-to-weight ratio.

Features:

• STIHL M-Tronic™ - This product features M-Tronic™ (M) - a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
• Ematic™ Lubrication System - The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• STIHL ElastoStart™ - The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• STIHL Quickstop® - STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Adjustable Automatic Oiler - The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
• Decompression Valve - The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Pre-Separation Air Filtration System - This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Tool less Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Throttle Trigger Lock - See it in action!
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications:

• Power Source: Gas
• Powerhead Weight: 10.8 lbs.
• Guide Bar Length (Recommended): 16 in.
• Chain: OILOMATIC® .325" RM3
• Chain Oil Capacity: 9.13 oz.
• Engine Power: 4.0 bhp (brake horsepower)
• Fuel Capacity: 16.9 oz.
• Displacement: 50.2 cc

Description:

Brains and brawn come together in this well-rounded professional chainsaw. The MS 362 C-M features the same great power, weight, and fuel efficiency as the MS 362, but it also features exclusive STIHL M-Tronic™ engine management technology. This innovative microprocessor-controlled engine management system optimizes engine performance and compensates for changes in operating conditions, such as temperature, elevation, fuel quality, and dirty air filters. It makes sure you’re working with optimal cutting power in any cutting condition.

Features:

• STIHL M-Tronic™ - This product features M-Tronic™ (M) - a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
• STIHL ElastoStart™ - The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• STIHL Quickstop® - STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Decompression Valve - The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Pre-Separation Air Filtration System - This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Tool less Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Throttle Trigger Lock - See it in action!
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications:

• Power Source: Gas
• Powerhead Weight: 12.35 lbs
• Guide Bar Length (Recommended): 20 in
• OILOMATIC® Chain: 3/8" RS3
• Chain Oil Capacity: 11 oz
• Engine Power: 4.69 bhp (brake horsepower)
• Fuel Capacity: 20.3 oz
• Displacement: 59.0 cc

Description:

Meet your ideal business partner—the STIHL MS 462 C-M chainsaw—specially engineered for the professional who desires more power with less weight. At just over 13 pounds, the MS 462 C-M is the lightest-ever STIHL chainsaw produced in its fuel-powered class and thus reduces the fatigue you experience in daily forestry work. It features an excellent power-to-weight ratio for added maneuverability tested by professionals in the field. The next generation STIHL M-Tronic™ engine management system electronically controls ignition timing and fuel metering. Conveniently, the saw auto-adjusts for changes in its operating environment, such as changes in altitude and fuel quality, for optimal performance. As an added measure to reduce vibration and user fatigue, the anti-vibration system is designed for good handling when the MS 462 C-M is equipped with longer guide bars.

Features:

• STIHL M-Tronic™ - This product features M-Tronic™ (M) - a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
• STIHL ElastoStart™ - The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• Ematic™ Lubrication System - The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• STIHL Quickstop® - STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Lightweight Portability - This product is lightweight for easy portability, great maneuverability, and extended use.
• Adjustable Automatic Oiler - The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
• Winter/Summer Shutter - The Winter/Summer Shutter allows the carburetor to operate at optimum temperature year-round and helps to prevent carburetor icing when working below 50°F (10°C).
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Decompression Valve - The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Pre-Separation Air Filtration System - This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Tool less Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Throttle Trigger Lock - See it in action!
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications:

• Power Source: Gas
• Powerhead Weight: 13.2 lbs.
• Guide Bar Length (Recommended): 25 in.
• Oilomatic® Chain: 3/8" RS3
• Chain Oil Capacity: 11.5 oz.
• Engine Power: 5.9 bhp
• Fuel Capacity: 24.3 oz.
• Displacement: 72.2 cc

Description:

Designed and built exclusively for forestry personnel and tree service professionals, the MS 500i is the first ever chainsaw on the worldwide market with electronically controlled fuel injection. With its excellent power-to-weight ratio, this saw is an impressive piece of equipment for pros looking to take on tree felling, bucking, or delimbing operations. Thanks to its unique fuel injection system, the MS 500i delivers rapid acceleration. Combining innovative technology with world-class engineering and durable construction, the MS 500i is another great addition to the long line of legendary STIHL chainsaws. 

Features:

• Sensor-Controlled Fuel Metering - Sensor-controlled fuel metering delivers the right amount of fuel.
• Quick Acceleration - Quick acceleration helps deliver excellent cutting performance.
• New Generation MDG 1 Diagnostic Software - This product's diagnostic software allows dealers to quickly identify what service might be needed.
• Quarter Turn Lock on the Air Filter Shroud - The quarter-turn shroud lock provides quick access, so users can quickly and efficiently service the chain saw with minimal down time on the job.
• Simplified Starting Procedure - Saves the user time and reduces the chance of flooding the engine when starting.
• HD2 Air Filter - The HD2 air filter on this unit is washable, providing extremely long filter life and lowering maintenance costs. The large surface area allows for longer run times between cleanings and high performance even while operating in dusty and dry conditions. Overall, the HD2 air filter provides better protection of the engine compared to standard air filters.
• High Power-to-Weight Ratio - This feature allows users to get more done by minimizing fatigue.
• STIHL ElastoStart™ - The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• Ematic™ Lubrication System - The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• STIHL Quickstop® - STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Lightweight Sprocket Cover with Captive Bar Nuts - The sprocket cover is lightweight and the captive bar nuts are held securely in place for efficient saw chain maintenance.
• High Output Adjustable Oiler - When used with STIHL OILOMATIC ® saw chain and STIHL Ematic ™ guide bars, the high output oiler can supply additional lubrication if needed for longer guide bars and/or dry/dusty cutting conditions.
• Purge Pump Primer - The purge pump primer feature enables the user to prime the carburetor with fuel, enabling easier starting. The purge pump primer is designed in a way that the operator cannot flood the machine by priming the carburetor too many times. Flooding the engine is still possible if the choke is not removed after the engine turns over.
• Unique Bumper Spike Design - Unique bumper spike design ensures pros can expect optimal performance regardless of what species of tree they're cutting.
• Decompression Valve - The decompression valve reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope.
• Translucent Fuel Tank - The semi-transparency allows operators to easily check the fuel level before starting work.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Throttle Trigger Lock - See it in action!

Specifications:

• Power Source: Gas
• Powerhead Weight: 13.9 lbs.
• Guide Bar Length (Recommended): 25 in.
• Oilomatic® Chain: 3/8" RS3
• Chain Oil Capacity: 11 oz.
• Engine Power: 6.7 bhp
• Fuel Capacity: 26.5 oz.
• Displacement: 79.2 cc

Description:

You aren't afraid to take on the largest, toughest, and most demanding jobs, and you need a powerful professional chainsaw you can rely on. For the toughest jobs, you can find the performance you need in the MS 881 MAGNUM® chainsaw. With reduced exhaust emission engine technology, an IntelliCarb™ compensating carburetor, and up to a 41-inch guide bar length, the MS 881 MAGNUM® is the largest, most powerful chainsaw in the STIHL lineup. Great fuel efficiency means you save both time and money. Another time-saving features is the stop switch, which automatically returns to the run position after the engine is stopped, reducing the chance of flooding the engine when starting. There is no substitute for the most powerful production chainsaw currently on the market—the STIHL MS 881 MAGNUM®.

Features:

• Largest, Most Powerful Saw - With its updated engine design and up to 41” guide bar length, the MS 881 is the largest, most powerful chainsaw in the STIHL lineup.
• Greater Fuel Efficiency & Reduced Exhaust Emissions - The MS 881 MAGNUM® has the same power as the previous model while using less fuel and reducing exhaust emissions, saving time and money while also being better for the environment.
• Ematic™ Lubrication System - The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• STIHL ElastoStart™ - The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• HD2 Air Filter - The HD2 air filter on this unit is washable, providing extremely long filter life and lowering maintenance costs. The large surface area allows for longer run times between cleanings and high performance even while operating in dusty and dry conditions. Overall, the HD2 air filter provides better protection of the engine compared to standard air filters.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• STIHL Quickstop® - STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Efficient Stop Switch Technology - Efficient stop switch technology saves users time and reduces the chance of flooding the engine when starting.
• Easy Manual Adjustment of the Carburetor Settings - The simplified design of the carburetor allows for easy manual adjustment.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Lightweight Sprocket Cover with Captive Bar Nuts - The sprocket cover is lightweight and the captive bar nuts are held securely in place for efficient saw chain maintenance.
• Adjustable Automatic Oiler - The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
• Decompression Valve - The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Throttle Trigger Lockout - This safety feature must be depressed before the trigger can be activated.
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications:

• Power Source: Gas
• Powerhead Weight: 21.8 lbs
• Guide Bar Length (Recommended): 25 in
• OILOMATIC® Chain: 3/8" RS3
• Chain Oil Capacity: 23.7 oz
• Engine Power: 8.6 bhp
• Fuel Capacity: 44 oz
• Displacement: 121.6 cc
• Intended Use: Professional

Description:

The STIHL MS 170 is the perfect lightweight chainsaw for homeowners seeking a great value. Compact, lightweight with just the right amount of power, the MS 170 makes quick work of trimming or cutting small trees, fallen limbs after a storm, and other tasks around the yard. Even at its great price, the MS 170 has many of the same design features the professionals depend on.

Features

• Made in America - A majority of STIHL products sold in America are made in America of U.S. and global materials.

• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.

• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.

• Ematic™ Lubrication System - The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.

Specifications :

• Power Source: Gas
• Powerhead Weight: 8.6 lbs.
• Guide Bar Length (Recommended): 16 in.
• OILMATIC® Chain: 3/8" PMM3
• Chain Oil Capacity: 4.9 oz.
• Engine Power: 1.7 bhp
• Fuel Capacity: 8.5 oz.
• Displacement: 30.1 cc.

Description:

With its exceptional power-to-weight ratio, the MS 194 T packs professional-grade performance into a compact and lightweight body. Its efficient, low exhaust emission engine delivers excellent fuel economy. One-touch stop allows you to turn off the engine with the press of a button, which saves time and reduces the chance of flooding when restarting. Dependable and hardworking, the MS 194 T also includes a diagnostic port, making it easy to access data and service the product.

Features:

• Top Handle (T) - The top-handle model is specially designed for in-tree professional use only!
• Ematic™ Lubrication System - The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• STIHL Quickstop® - STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• Lightweight Portability - This product is lightweight for easy portability, great maneuverability, and extended use.
• Powerful Low Exhaust Emission Engine - A powerful low exhaust emission engine saves users fuel and operating costs without losing the power they count on to get the job done.
• Built-In Retractable Carry Ring - The built-in carry ring makes it convenient and easy to maneuver in and out of trees.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Purge Pump Primer - The purge pump primer feature enables the user to prime the carburetor with fuel, enabling easier starting. The purge pump primer is designed in a way that the operator cannot flood the machine by priming the carburetor too many times. Flooding the engine is still possible if the choke is not removed after the engine turns over.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Throttle Trigger Interlock - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Made in America - A majority of STIHL products sold in America are made in America of U.S. and global materials.

Specifications:

• Power Source: Gas
• Powerhead Weight: 7.28 lbs.
• Guide Bar Length (Recommended): 14 in.
• Oilomatic® Chain: 3/8" PM3
• Chain Oil Capacity: 7.4 oz.
• Engine Power: 1.88 bhp
• Fuel Capacity: 9.1 oz.
• Displacement: 31.8 cc